Notes and Restrictions
839
Appendix
16
îš„ Gigabit Ethernet
Installing the Gigabit Ethernet achieves high-network communication speed, but it does
not shorten the entire printing time.
îš„ Print Jobs while the Control Panel is being Operated
The processing and output speeds of print jobs may slow in the following conditions:
z
The control panel is being operated while the machine processes a print job.
z
The status of a print job is being viewed in the [Job Status] screen.
îš„ When the Print Results Differ from the Settings
As in the following cases, insufficient memory for the print page buffer may cause print
result in not printing as specified. In this case, we recommend that you increase the
memory.
z
Printed only on 1 side when 2 sided printing is specified.
z
A job was terminated (If data cannot be written to the print page buffer, the job
including that page is terminated).
îš„ Direct Print via USB Host (a USB memory device)
When the machine is in the Sleep mode, your computer does not detect the machine if you
connect a USB memory device to the machine. Exit the Sleep mode, and then connect the
USB memory device and send a print job.
îš„ Printing from a USB Memory Device
z
To print from a USB memory device, the USB Memory Kit (optional) is required.
z
You can use a USB host adapter to print from your USB memory device or via your USB
cable (as necessary), but the operation is not guaranteed.
z
Use USB 2.0 compliant memory devices only.
The following USB memory devices are not supported:
- A USB memory device with multiple media partitions that require other utilities to
access to the contents therein.
- A USB memory device connected via an external hub.
z
Multiple USB memory devices cannot be used simultaneously.
z
The machine does not display a menu to prevent you from removing a USB memory
device while it is being accessed.
îš„ Meter Counts for 2 Sided Printing
When printing 2 sided, depending on the application being used, blank sheets can be
inserted automatically to adjust pages. These blank sheets inserted by the application will
also be counted by the meter.
îš„ Meter Count for Watermark
When the Copy Management Expansion Kit (optional) is installed and a document is
printed using the Watermark feature (such as Annotation and Force Annotation), the
meters count with the following method:
z
Color documents are counted as color copies regardless of whether the Watermark
feature is used or not.
z
Black & white documents are counted as color copies if [Font Color] is set to other than
[Black], or counted as black & white if [Font Color] is set to [Black].
To Next Page
Loading...
Need help?
General
