Replacing Consumables
91
Maintenance
3
3
After you take out the staple cartridge, check inside of the finisher for any remaining
staples. Remove any staples remaining inside.
4
Pinch both sides of the empty staple case with your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into the staple cartridge (1), and then push the
rear side into the cartridge (2).
6
Push the staple cartridge into the finisher until it clicks into place.
7
Close the finisher front cover.
z
If the front cover is not closed completely, a message appears and the machine will remain paused.
To Next Page
Loading...
Need help?
General
