Fuji Xerox Document Centre 1100

Output Format
109
Copy
3
Output Orientation (Specifying Face Up or Down)
You can select whether copies should be output facing up or down.
1 Select [Output Orientation].
2 Select any item.
Auto
Automatically determines whether the copies should be output facing up or down.
Face Up
Copies are output facing up and delivered from the last page.
Face down
Copies are output facing down and delivered from the last page.
Face Up (Reverse Order)
Copies are delivered from the first page facing up.
Note • Whether [Face Up (Reverse Order)] is displayed depends on the system setting. For how to display it,
refer to "Output Orientation-Reverse Order" (P.332).
Folding (Outputting Bi-Folded or Tri-Folded paper)
You can make copies to be folded in half or in three.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Bi-Fold or Tri-Fold is available only for the paper size A4 or 8.5x11.
1 Select [Folding].
2 Select any item.
None
A copy is not folded.