7 Stored Programming
244
Stored Programming
7
1 Select [Store Build Job].
2 Select the number to register.
Note • Once a job is stored to a
button, it cannot be
overwritten.
• Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Set the feature you wish to register.
Note • A tone is generated while
registering to job memory.
4 Press the <Start> button or <Clear All> button.
You can change the volume of the sound that notifies of Stored Program registration.
Refer to "Stored Programming Tone" (P.303) for configuration procedure.
Deleting Stored Programs
The following describes the procedure for deleting a registered Stored Program.
1 Select [Delete].
2 Select the number to delete.
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select [Yes].
Yes
Deletes the Stored Program.
Note • Deleted Stored Programs cannot be restored.
No
The Stored Program delete operation is cancelled.
To Next Page
Loading...
