Fuji Xerox Document Centre 1100 User Manual

PCL Emulation
579
Specifications
16
PCL Emulation
The following table shows the emulation parameters and their values for PCL
emulation.
For information on how to change parameter values, refer to "Print Mode" (P.418)
Parameter
Item No. Value
Paper
Tray
201 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Tray 5 (Bypass)
Selects the paper tray. When [Auto] is selected, the machine automatically selects the
tray that contains the paper whose size is specified on the [Paper Supply] screen.
Auto Size 202 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
30: 8K
Sets the default paper size when the machine is set to select the paper size
automatically. Only available when [Paper Tray] is set to [Auto].
* The default value will be either [4] or [23] depending on the region of use.
Bypass
Size
203 3: A3
4 (Default*): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 (Default*): 8.5 × 11”
24: 11 × 17”
Sets the paper size for the bypass tray. Only available when [Paper Tray] is set to
[Tray 5 (Bypass)].
* The default value will be either [4] or [23] depending on the region of use.
Orientatio
n
205 0 (Default): Portrait
1: Landscape
Sets the document orientation.
2 Side
Print
206 0 (Default): Off
1: On
Sets whether to enable double-sided printing.

Fuji Xerox Document Centre 1100 Specifications

General

Brand	Fuji Xerox
Model	Document Centre 1100
Category	All in One Printer
Language	English