2 Product Overview
50
Product Overview
2
3 Select the features to be displayed.
Changing feature screen
You can customize the setting screen for the following features on the [All Services]
screen.
z
Copy
z
E-mail
z
Scan to Mailbox
z
Scan to FTP/SMB
For how to change settings, refer to "Copy Mode Settings" (P.50) and "Scan Mode Settings" (P.51).
Copy Mode Settings
You can set the features that appear in the [Basic Copying Tab] screen, in the third and
fourth columns from the left. By setting the most commonly used features, you reduce
the need to use operations in other tabs.
Note • Set a feature not to be overlapped.
1 In the [System Settings] screen,
select [Copy Mode Settings].
For the method of displaying the [System
Settings] screen, refer to the procedure 1 to
4 in "Customizing of the Control Panel"
(P.46).
2 Select [Basic Copying Tab -
Features Allocation].
3 Select [10 Features] or [7
Features].
4 From the buttons appearing on the
right ([Frequently Used
Features]), select the position for
which you want to make a setting.
To Next Page
Loading...
