Fuji Xerox Document Centre 1100

10 Setups
298
Setups
10
Machine Clock/Timers
You can set the clock time, or the timer interval until power saving or reset features take
effect.
1 Select [Machine Clock/Timers].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select [ ], [ ], or the numeric
keypad to enter a numeric quantity.
Note • Depending on the item, entry
with the numeric keypad may
not always be possible.
4 Select [Save].
Date
Set the date in the in the system clock of the machine. The date set here is printed on
lists and reports.
1 Select [Date], and select [Change
Settings].
2 Select the date format.
3 Select Year/Month/Day.
Time
Set the time in the system clock of the machine, using 12-hour or 24-hour
representation.
The time set here is printed on lists and reports.
1 Select [Time], and select [Change
Settings].
2 Select the display format.
3
When [12 Hour Clock] is selected,
select [AM] or [PM].
4 Set the hours and minutes.