7 Stored Programming
242
Stored Programming
7
îš„Store
You can register stored programs.
Refer to "Registering Stored Program" (P.242).
îš„Store Build Job
You can register stored programs for a Build Job.
Refer to "Registering Stored Program (Build Job)" (P.243).
îš„Delete
You can delete stored programs.
Refer to "Deleting Stored Programs" (P.244).
îš„Enter/Change Name
You can enter or change names of stored programs.
Refer to "Naming/Renaming a Stored Program" (P.245).
Registering Stored Program
A stored program can record up to 100 features. In addition, up to 40 actions in total
with stored programs for the build job can be registered with a stored program.
One touch buttons M01 to M20 are provided for Stored Programs 1 to 20.
The following describes the procedure for registering actions with a Stored Program.
Important • A stored program, which is registered, may not be called out correctly if following operations
are launched after the stored program registration.
• When changing default settings for set numbering feature after a stored program is
registered as the set numbering feature is registered to the stored program.
• When features registered to the stored program does not work after default values are
changed by system settings.
• When the password for the object of mailbox operation differs from the time of the stored
program registration at the stored program operating mailbox.
• When registering the paper size and paper quality of bypass to the selecting the stored
program, register both the size and quality. Only registering the paper size or paper quality
may not call for the stored program correctly.
• If launching the following operations while a stored program is being registered, registering a
stored program and the stored program performance are not working well.
• Removing and setting a paper tray.
• Loading paper into bypass.
• Removing paper loaded in bypass.
Note • You cannot register System Settings.
• If the <Interrupt> button is pressed, if the Auto Reset feature causes a time-out, or if a popup
window (paper jam, etc.) appears, then the Stored Program record operation is cancelled.
To Next Page
Loading...
Need help?
General
