Cautions and Limitations
603
Specifications
16
Notes and Restrictions on Printing Box Documents
The following is the notes and restrictions when printing Copy & Print Jobs documents.
Notes and Restrictions on Copy Jobs Documents
Item Notes and Restrictions
Paper Supply - Only the paper tray for the same size and direction of the stored documents can
be selected.
- Only [Auto] or [Document Settings] can be selected for mixed size originals.
- The paper tray set as separators, transparency separators, covers, or tab papers
cannot be selected.
Finishing - [Z-Fold] can be selected only when the paper size is B4, A3, 11x7,or 8K.
Covers
−
Folding - [Z Tri-Fold] or [C Tri-Fold] can be selected only when the paper size is landscape
A4 or letter. [Document Settings] is selected when the paper size is other than
landscape A4 or letter even if you selected tri-fold.
- [Bi-Fold] can be selected only when the paper size is landscape A4. [Document
Settings] is selected when the paper size is other than landscape A4 even if you
selected bi-fold.
2 Sided Printing - Settings of [2 Sided Printing] cannot be changed when the documents are set as
separators, transparency separators, covers, or tab papers.
- [2 Sided Printing] cannot be set for the papers that cannot be loaded in the Trays
1 to 4, 6, and 7.
- When [2 Sided Printing] is set to [Off], the first blank page of [2 Sided Book Copy]
is output as a blank sheet.
Image Shift
−
Booklet Creation - Booklet cannot be newly created. Only cancelling [Booklet Creation] and setting
[Folding] or [Folding/Stapling] can be set.
- Stapling edge, back cover and subsets cannot be selected.
- The paper size that can be folded is only landscape A4 or over. [Document Set-
tings] is selected when the paper size is other than landscape A4 or over even if
you selected folding.
Annotation - If you select [Document Settings], the documents are printed in the language that
are set when storing. If you select [Change Settings], the documents are printed
in the language that are set when printing.
Set Numbering - If you set [Force Set Numbering] of [Set Numbering] in [Common Settings] in
[Setups] when printing the documents with set numbering, the text effect will be
printed double.
- If you select [Document Settings], the documents are printed in the language that
are set when storing. If you select [Change Settings], the documents are printed
in the language that are set when printing.
Output Orientation
−
To Next Page
Loading...
Need help?
General
