12 Machine Status
424
Machine Status
12
3 Select the [Billing Meter/Print
Report] tab.
4 Select [User Account Billing Meter].
5 Select the meter you want to
check.
Copy Meter
This shows the number of pages copied.
Scan Meter
This shows the number of pages scanned.
Print Meter
This shows the number of pages printed.
Reset Job Counters
You can reset the cumulative counts of scanned and printed pages for each job.
This appears when the UserID for System Administration mode is set, and you have
entered from [User Mode] in System Administration mode.
1 Press the <Log In/Out> button.
2 Enter the Administrator UserID with
the numeric keypad or a keyboard
displayed by pressing [Keyboard],
and select [Confirm].
Note • The default UserID value is
"11111". When using the
Authentication feature, a
password is required. The
default password value is "x-
admin".
To Next Page
Loading...
