Fuji Xerox Document Centre 1100

10 Setups
350
Setups
10
Scan Mode Settings
Make settings relating to the scanner feature.
Note • This feature does not appear for some models. An optional package is necessary to use this
feature. For some models, this feature is available only when it is equipped as factory option.
For more information, contact our Customer Support Center..
When using CentreWare Internet Services, more detailed settings are possible. For more details, refer to
"CentreWare Internet Services" (P.253), and refer to the Network Administrator Guide.
The following are the places to reference for details of each setting.
Basic Scanning Tab...................................................................................................................351
Scan Defaults ............................................................................................................................352
Scan-to-FTP/SMB Defaults ......................................................................................................354
Scan Size Defaults ....................................................................................................................354
Output Size Defaults .................................................................................................................355
Reduce/Enlarge Presets.............................................................................................................356
Other Settings............................................................................................................................356
1 In the [System Settings] screen,
select [System Settings].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.284).
2 Select [Scan Mode Settings].