10 Setups
338
Setups
10
Network Settings
In [Network Settings], set the type of interface through which the machine is connected
to the client in [Port Settings], and the parameters required for communications in
[Protocol Settings].
For information about network settings, refer to the Network Administrator Guide.
When using CentreWare Internet Services, more detailed settings are possible. For more details, refer to
"CentreWare Internet Services" (P.253), and refer to the Network Administrator Guide.
The following are the places to reference for details of each setting.
Port Settings ..............................................................................................................................339
Protocol Settings .......................................................................................................................339
Machine E-mail Address/Host Name .......................................................................................339
POP3 Server Settings................................................................................................................340
SMTP Server Settings...............................................................................................................340
Domain Settings........................................................................................................................340
Remote Authentication Server Settings ....................................................................................340
PKI Settings (Public Key Infrastructure)..................................................................................341
Other Settings............................................................................................................................342
1 In the [System Settings] screen,
select [System Settings].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.284).
2 Select [Network Settings].
To Next Page
Loading...
Need help?
General
