Fuji Xerox Document Centre 1100

4 Scan
130
Scan
4
Stopping the Scan Job
Follow the procedure below to cancel a scan.
1 Press either [Stop] on the touch
screen or the <Stop> button on the
Control Panel.
2 Select [Stop].
Note • You can also stop the scan job by pressing the <C> button or the <Clear All> button.
3 If the screen in procedure 1 does
not appear, press the <Job Status>
button.
4 Select the job to cancel, and then
select [Stop].
Note • When a scan is cancelled,
scan data already stored to
the mailbox is deleted.

<Stop> button
<Job Status>
button