Scan Options
161
Scan
4
Reduce/Enlarge (Specifying a Scanning Ratio)
You can set the scanning ratio for the documents to be scanned.
1 Select [Reduce/Enlarge].
2 Select the desired scanning ratio.
100%
Scan is made at the same size as the document.
Preset %
Select from twelve preset copy ratios.
You can change the indicated ratios. For more information about settings, refer to
"Reduce/Enlarge Presets" (P.356).
Variable %
You can scan by selecting a variable ratio. The ratio can be set in increments of 1%
within the range 25-400%.
Auto %
Select the output size of the scanned documents in [Output size]. The copy ratio is
automatically set based upon the document and paper sizes specified in [Output size],
and the document is scanned to fit in the specified size.
Note • White space remaining after scanning with [Auto %] is blank data.
To Next Page
Loading...
