10 Setups
328
Setups
10
Copy Defaults
This sets the default settings of copy feature settings. When the power is turned on or
the machine returns from a power-saving state, or the <Clear All> button is pressed,
these default settings take effect. By setting the defaults to commonly used features,
you can reduce the number of setting operations required in use.
1 Select [Copy Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select the setting value.
4 Select [Save].
Paper Supply
Set the default value for [Paper Supply] in the [Basic Copying] screen.
When the default value of [Reduce/Enlarge] is set to [Auto %], for [Paper Supply] it is
not possible to set [Auto].
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [Basic Copying Tab] screen.
Select the magnification from the seven buttons registered as R/E Preset buttons,
[100%], and [Auto %], a total of nine possibilities.
When the default setting for [Paper Supply] is [Auto], for [Reduce/Enlarge] it is not
possible to set [Auto %].
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.337).
Original Type
Set the default value for [Original Type] in the [Image Quality] screen.
Lighten/Darken
Set the default value for [Lighten/Darken/Contrast] > [Lighten/Darken] in the [Image
Quality] screen.
Sharpness
Set the default value for [Sharpness/Color Saturation] > [Sharpness] in the [Image
Quality] screen.
Auto Exposure
Set the default value for [Auto Exposure] in the [Image Quality] screen.
[Auto Exposure] is valid when [Original Type] is set to [Text & Photo], [Text], or [Map].
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Scan Options] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
To Next Page
Loading...
Need help?
General
