Replacing Consumables
465
Maintenance
14
3 Put the used staple scrap container
into the provided plastic bag.
Important • Proper disposal of unwanted
staple scrap container is
required. Staple scrap
container should not be
opened with force and must
be returned to our Customer
Support Center.
4 Push the staple scrap container
from its bottom by holding the R5.
Important • Never put your fingers onto
the top end surface of the
staple scrap container when
pushing it.
5 Push the R5 until the lever aligns
with the lock sign.
6 Close the Finisher's right cover.
Note • A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
Replacing the Staple Cartridge for Booklet
When a Finisher is installed and it is time to replace the staple cartridge for booklet, a
message appears on the display.When this message appears, replace the staple
cartridge with a new one.
Important • The use of staple cartridges not recommended by Xerox may impair quality and
performance.Use only staple cartridges recommended by Xerox for the machine.
Note • To order a staple cartridge, contact our Customer Support Center.
1 Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
To Next Page
Loading...
