5 Check Mailbox
184
Check Mailbox
5
Blank Separators
Blank separators are inserted. The number of separators can be set within the range
from 1to 99, as necessary.
Printed Separators
When multiple documents are merged, the first page of each documents is set as a
separator.
No Chapter Start
The merged documents will become one 2 sided document without any chapter
divisions.
Separators Tray
Paper trays for separators can be selected.
Separators Quantity
Number of separators can be set within the range from 1 to 99.
Stapling/Hole Punching/Z Fold
This feature allows you to program stapling/hole punching/Z fold settings before
merging documents.
1 Select [Stapling/Hole Punching/Z
Fold].
2 Select an item.
Staple Position
Stapling position can be set.
Punch Position
Hole punching position can be set. If [More...] is selected, the [Finishing - Hole
Punching] screen is displayed.
For more information, refer to "[Finishing - Hole Punching] Screen" (P.185).
Z Fold
Whether or not to Z-fold can be set.
To Next Page
Loading...
