KS Emulation
597
Specifications
16
KS Emulation
The following table shows the emulation parameters and their values for KS emulation.
These are the settings to be done for CentreWare Internet Services.
Parameter Value
Paper Tray 0 (Default): Auto
1: Tray 1
2: Tray 2
3: Tray 3
4: Tray 4
5: Tray 5 (Bypass)
6: Tray 6
7: Tray 7
Selects the paper tray. When [Auto] is selected, the machine automatically
selects the tray that contains the paper whose size is specified on the
[Paper Supply] screen.
Document
Orientation
0 (Default): Portrait
1: Landscape
Sets the document orientation.
Paper Size
(Bypass tray 5)
3: A3
4 (Default): A4
5: A5
14: B4
15: B5
21: 8.5 × 14”
22: 8.5 × 13”
23 8.5 × 11”
24: 11 × 17”
24: 5.5× 8.5”
30: 8K
Sets the default paper size when the machine is set to select the paper size
automatically. Only available when [Paper Tray] is set to [Auto].
Orientation
(Bypass tray 5)
3: SEF
4 (Default*):LEF
Sets the paper orientation loaded on the bypass tray.
Paper Size
Width (Bypass
tray 5)
100 - 297 (Default: 210): Sets the width of paper size in 1 mm increment.
Paper Size
Height (Bypass
tray 5)
148 - 420 (Default: 297): Sets the height of paper size in 1 mm increment.
Output Tray 0 (Default): Center Output Tray
1: Side Output Tray
80: Finisher Tray
Sets the output tray.
Print Sets 1–999 (Default: 1): Specify the number of print sets.
To Next Page
Loading...
Need help?
General
