Fuji Xerox Document Centre 1100

5 Check Mailbox
194
Check Mailbox
5
[Set Numbering - Text] Screen
This feature allows you to set character types used for set numbering from 3 choices.
1 Select an item.
[Set Numbering - Text Effect] Screen
This feature allows you to program text effects.
Note • [Embossed] and [Outline] may not be displayed on some machines. An optional package is
necessary. For more information, contact our Customer Support Center.
1 Select an item.
Off
A specified text will be printed as it is.
Embossed
The text on the background is printed as if it is embossed. The type of character of the
text will be the type that had been programmed on [Set Numbering - Background
Pattern] of [System Settings].
Outline
The text on the background is printed in outline. The background other than the outlined
text is printed in the pattern programmed on [Set Numbering - Background Pattern] of
[System Settings].
For more information on [Set Numbering - Background Pattern] or other features, refer to "Set
Numbering" (P.316).