10 Setups
378
Setups
10
Transfer via SMB (1), Transfer via SMB (2)
Specify where SMB forwarding is to be stored.
îš„Address Book
When the server address is registered in the address book, you can specify the address
from the address book. The specified address appears in the [SMB Transfer] screen.
For more about the address book, refer to "Address Book" (P.380).
îš„Keyboard
Select one of [Recipient Name], [Server], [Shared Name], [Save in], [Login Name], and
[Password] and press the button, to display an input screen.
The numbers of characters you can input are as follows.
z
Recipient Name: 18 bytes maximum
z
Server : 64 bytes maximum
z
Shared Name : 128 bytes maximum
z
Save in : 128 bytes maximum
z
Login Name : 32 bytes maximum
z
Password : 32 bytes maximum
For more details, refer to "Address Book" (P.380).
îš„Delete
This deletes all information for the selected addresses.
îš„Change Settings
You can confirm or change the selected recipients.
For information about the method for confirm/change, refer to "Address Book" (P.380).
To Next Page
Loading...
Need help?
General
