Login Setup/Auditron Administration
393
Setups
10
Account ID Characters
If required, you can change the indication that appears as AccountID on the [System
Administrator Login] screen when the control panel <Log In/Out> button is pressed to
such as "Account Name" or "Number". The alias can be set to 1 to 15 characters.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.396).
• The value is also reflected in report/list displays, and when accessing from CentreWare
Internet Services.
Hide Account ID
You can set the way in which the AccountID is shown as it is being input. Use this for
extra security as required.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.396).
îš„Show
As you enter the AccountID, the characters are echoed on the screen in the normal
way.
îš„Hide
As you enter the AccountID, the character string is hidden as a row of asterisks (*****).
Failed Access Log
In order to detect unauthorized access, if the authentication fails within a set time, then
an error is logged. You can set the failing times within the range from 1 to 600.
1 Select [Failed Access Log].
2 Enter the failing times using the
numeric keypad.
Store User Details
You can set the destination to save authentication information. Select NVM or hard
disk.
Note • This item appears when [Network Access] is selected in "Login Setup/Auditron Mode"
(P.396).
To Next Page
Loading...
Need help?
General
