Machine Status
419
Machine Status
12
Retrieve Programming
You can recall a printer mode saved in memory, and use it.
1 Select [Retrieve Programming].
Select the memory number to be
used.
îš„Factory Defaults
You can use the factory default settings.
îš„Custom Settings
The custom settings number appears.
Programming
You can check or set the value set for a printer mode item number.
1 Select [Programming].
2 Enter the [Item No.] for the feature
to be set, using the numeric
keypad.
3 Select [Confirm].
4 Select [Change Value].
5 Enter [New Value], using the
numeric keypad.
6 Select [Save].
îš„Item Number
Enter the item number for the feature you want to set.
îš„Current Value
When you enter an [Item Number], this shows the currently set value.
To Next Page
Loading...
Need help?
General
