2 Product Overview
42
Product Overview
2
7 Select [8. Auto Power Saver], and
select [Change Settings].
8 Using [ ] [ ], configure a power
saver mode migration time from 1
to 240 minutes, in 1 minute
increments.
îš„From Last Selection to Low Power Mode
Set the time to move to the [Low Power Mode] after the last operation.
Note • The default for [From Last Selection to Low Power Mode] is [15] minutes.
îš„From Last Selection to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note • The default for [From Last Selection to Sleep Mode] is [60] minutes. Configure the [From
Last Selection to Sleep Mode] time to be longer than the [From Last Selection to Low Power
Mode] time.
9 Press [Save].
10 Select [Close] repeatedly until the [System Settings/Registration] screen is displayed.
11 Select [Exit] to exit the System Administration mode.
To Next Page
Loading...
Need help?
General
