Control Panel
47
Product Overview
2
5 Select [Common Settings].
6 Select [Screen Defaults].
7 Select the item to be set.
Assigning a Feature to Custom Buttons
You can assign features to the custom buttons on the control panel: Custom 1 to
Custom 3.
By assigning a feature to Custom buttons (<Copy>, <Custom 2>, and <Custom 3>),
you can switch to that feature without returning to the [All Services] screen. To leave a
feature unassigned, select [Not Set].
The factory default settings for these buttons are, "Copy" for the 1st button, and none
for the 2nd and 3rd buttons.
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker and attach it to the appropriate Custom button.
To Next Page
Loading...
