Trouble during Printing
491
Problem Solving
15
The image is cut off on the
edge of the paper.
Cause Image exceeds the printer's printable area.
No
Action Increase the printer's printable area, or decrease the
document print area.
The printed font differs
from the font specified on
the computer.
Cause Font replacement is configured on the print driver.
No
Action Check the font replacement table.
Cause Non-standard fonts are used for printing.
Action Check the application or print driver settings.
If the PostScript is being used, download the required fonts.
Printing is slow Cause The print mode specifies Print Quality.
No
Action When printing image data that has image quality as a
priority, such as pictures, the print speed decreases. Turn
off the quality priority in the print mode.
The settings specified for
print options do not take
effect
Cause A print driver for another model is in use.
No
Action Install the print driver for this model.
Cause The optional apparatus cannot be attached to the printer.
Action Check the options attached with this printer, and reset the
printer configuration.
There is no edge Cause Image exceeds the printer's printable area.
Action Increase the printer's printable area, or decrease the
document print area.
To Next Page
Loading...
Need help?
General
