15 Problem Solving
526
Problem Solving
15
Paper jams at lever 3g and knob 3f
1 Make sure that the machine has
stopped, and then open the right
cover on the light finisher.
2 Move lever 3g, turn knob 3f to the
left, and remove the jammed
paper.
Note • If paper is torn, check for any
torn pieces of paper inside the
machine.
3 Return lever 3g to the original
position.
4 Close the Light Finisher's right cover.
Note • A message will be displayed and the machine will not operate if the Staple Finisher's right
cover is even slightly open.
Paper jams at lever 4b and knob 3a
1 Make sure that the machine has
stopped, and then open the right
cover on the light finisher.