2 Product Overview
52
Product Overview
2
2 Select [Basic Scanning Tab].
3 Select the item to be set or
changed, and select [Change
Settings]
4 Set the setting value.
5 Select [Save].
Feature in 2nd Column
You can set the features shown in the second column of the [Basic Scanning Tab]
screen.
You can select from [2 Sided Originals], [Scan Resolution], [Lighten/Darken], and
[Reduce/Enlarge].
Reduce/Enlarge - Button 2
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Set the magnification shown in the second row from the top of the five feature buttons
shown in [Reduce/Enlarge] in the [Basic Scanning Tab] screen.
Select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.337).
Reduce/Enlarge - Button 3
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Set the magnification shown in the third row from the top of the five feature buttons
shown in [Reduce/Enlarge] in the [Basic Scanning Tab] screen.
Select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.337).
To Next Page
Loading...
Need help?
General
