Scan Options
85
Copy
3
[Image Shift - Side 1] Screen
You can set the copy position/Image Shift of Side 1.
1 Select [Side 1].
2 Select any item.
No Shift
Copies are made without the position of the document image being shifted.
Auto Center
Copies are made so that the center of the document matches the center of the paper.
Corner Shift
Copies are made with the document image shifted to the edges or corners of the paper.
You can select from eight shift directions.
z
Fine Adjustment (Right-and-left)
You can make a few minor adjustments left and right. The document is copied with
its image shifted to the left or right within a range of 0 to 50 mm, in 1mm increments.
z
Fine Adjustment (Top-and-bottom)
You can make a few minor adjustments up and down. The document is copied with
its image shifted to the top or bottom within a range of 0 to 50 mm, in 1mm
increments.
Variable Shift
Enter the margin values for copying. Set the top, bottom, left, and right values within
the range from 0 to 50 mm in 1mm increments.
[Image Shift - Side 2] Screen
You can set the copy position/Image Shift of Side 2.
1 Select [Side 2].
2 Select any item.
To Next Page
Loading...
