EasyManua.ls Logo

Fuji Xerox DocuPrint 5105 d

Fuji Xerox DocuPrint 5105 d
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.1 Overview of the Common Menus 143
The following table describes the overview of the common menus.
Note
For information on the basic procedure to set each menu item, refer to "Basic Procedure" (P. 144).
Common menu Description Reference
Print Reports Allows you to print a variety of reports/lists. "Printing Reports/Lists" (P. 310)
Meter Reading Displays the number of printed pages on the control panel. "Checking the Meter Reading
(Meter)" (P. 314)
Admin Menu [Network/Port]
Sets host interfaces and the settings required to enable their
communication.
"[Network/Port]" (P. 147)
[System Settings]
Sets the printer's basic functions, such as alert tones and the
Energy Saver feature. It also sets a password for the control
panel to prevent settings from being changed
unintentionally.
"[System Settings]" (P. 166)
[Printer Settings]
Sets the paper trays and the Auto Tray Selection feature.
"[Printer Settings]" (P. 189)
[Allocate Memory]
Changes the size of memory and form memory of each
interface.
"[Allocate Memory]" (P. 204)
[Image Quality]
Adjusts the printer when the print quality is not as expected.
"[Image Quality]" (P. 206)
[Adjust Finisher]
Adjusts the position of the punch holes when the finisher is
installed or the folding position for booklet printing.
" [Adjust Finisher]" (P. 207)
[Init/Delete Data]
Initializes the hard disk and settings, and deletes data (such
as forms) stored in the printer.
" [Init/Delete Data]" (P. 208)
LanguageEmulation [ESCP]
Sets the ESC/P emulation mode.
‘ESC/P Emulation Setting Guide’ on
the Media (Software/Product
Manual).
[HPGL]
Sets the HP-GL and HP-GL/2 emulation modes.
‘HP-GL, HP-GL/2 Emulation Setting
Guide’ on the Media (Software/
Product Manual).
[PDF]
Configures the settings for printing PDF files directly.
" [PDF]" (P. 210)
[PCL]
Sets the PCL emulation mode.
‘PCL Emulation Setting Guide’ on
the Media (Software/Product
Manual).
[PostScript]
Sets the PostScript-related settings.
"[PostScript]" (P. 212)
[XPS]
Configures the settings for printing XML Paper Specification
(XPS) files directly.
"[XPS]" (P. 212)
[XDW (DocuWorks)]
Configures the settings for printing DocuWorks files directly.
" [XDW (DocuWorks)]" (P. 213)
Language Switches the control panel display language. "[LanguageEmulation]" (P. 209)

Table of Contents

Related product manuals