U41117-J-Z125-7-76 529
Explanation of console messages Message lines
SXVW031 VLPWATCH: ALERT: VW(#031) AutoVLP-failover: internal or external LAN connection
is not configured; terminated!
SXVW031 VLPWATCH: ALERT: VW(#031) AutoVLP-failover: please correct the LAN-connection
and reboot the system!
Meaning
Less than 2 LAN interfaces are configured, and this means that the internal or external LAN
is not configured.
Response
Check the LAN configuration and configure the missing interface.
SXVW032 VLPWATCH: NOTICE: VW(#032) AutoVLP-failover: switch_SVLP_to_VLP!
Meaning
The switchover of “SVLP to VLP” has been started. This message can only occur on the
current SVLP.
SXVW033 VLPWATCH: NOTICE: VW(#033) AutoVLP-failover: switch SVLP_to_VLP is running!
Meaning
The switchover of “SVLP to VLP” is running. This is logged every 30 seconds with this
message.
SXVW034 VLPWATCH: NOTICE: VW(#034) AutoVLP-failover: switch SVLP_to_VLP end with
nothing todo!
Meaning
The switchover of “SVLP to VLP” has been completed and nothing needed to be done; the
current ISP is already the VLP. This message can only occur after the AutoVLP failover
function has been started for the first time.
SXVW035 VLPWATCH: NOTICE: VW(#035) AutoVLP-failover: %s not configured for mirror!
Meaning
The mirror key exists but the RAID node is not configured for CMF.
SXVW036 VLPWATCH: NOTICE: VW(#036) AutoVLP-Failover: wait max. 420 seconds before a
failover after boot, if VLP is not alive
Meaning
The SVLP waits for 7 minutes in its boot phase for a sign of life from the VLP. If there is no
sign of life after this period has elapsed the switchover of “SVLP to VLP” is started.
SXVW037 VLPWATCH: NOTICE: VW(#037) AutoVLP-Failover: wait max. 300 seconds before a
failover after start, if VLP is not alive
Meaning
The AutoVLP failover function has been started on the SVLP and the latter is not in the boot
phase. A sign of life from the VLP is waited for for 5 minutes. If there is no sign of life after
this waiting time the switchover of “SVLP to VLP” is started.
This message can only occur on the current SVLP.
To Next Page
Loading...
Need help?
General