102 Upgrade and Maintenance Manual BX924 S4
Hard disk drives / Solid state drives
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20565-001.fm
The following figure shows the connector for SSD 0 on the system board (see
arrow).
Figure 18: Connector for the SSD 0 module
Figure 19: Mounting the SSD 0 module into its location
Ê Slide the mounting kit into the cut-out (1) of the mounting platform.
Ê Plug the mounting kit into the connector (see arrow in figure 18 on page 102)
for SSD 0 on the mounting platform (2).
Ê Secure the mounting kit with the knurled screw (3).
Ê Install the mezzanine carrier as described in section "Installing mezzanine
cards" on page 134
SSD #0
To Next Page
Loading...
