176 Upgrade and Maintenance Manual BX924 S4
Processors
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20568-001.fm
9.2.3 Installing a processor
I This description applies to the following procedures:
– Installing the second CPU in a single-processor configuration
– Transferring a CPU after replacing the system board (see section
"Removing processors" on page 186 and "Installing processors" on
page 174).
Figure 59: Opening socket release lever 1
Ê Unlatch the socket release lever marked Open 1st by pushing it down and
away from the socket (1).
Ê The socket release lever will slightly lift up (2).
To Next Page
Loading...
