BX924 S4 Upgrade and Maintenance Manual 111
Hard disk drives / Solid state drives
6.4.4 Removing HDD/SSD 1
Removing HDD/SSD 1 from the "dummy heat sink"
Figure 27: Removing HDD/SSD 1 from the mounting platform
Ê Loosen the knurled screw of the mounting kit (1).
Ê Unplug the mounting kit from the connector by lifting it off from the mounting
platform (2).
Ê Slide the mounting kit out of the cut-out (3) of the mounting platform.
To Next Page
Loading...
