234 Upgrade and Maintenance Manual BX924 S4
System board components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20569-001.fm
Figure 105: Installing the UFM
Ê Connect the UFM to the system board.
Ê Secure the UFM with the nylon screw (see arrow).
10.2.1.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section "Closing the server blade" on
page 56.
Ê Reinstall and secure it in the system unit as described in section "Installing
the server blade in the system unit" on page 57.
Ê If applicable, close the rack door as described in section "Closing the rack
door" on page 62.
Ê Enable boot watchdog functionality as described in section "Enabling boot
watchdog functionality" on page 84.
To Next Page
Loading...
