Fujitsu PRIMERGY BX924 S4 - Installing the CMOS Battery

BX924 S4 Upgrade and Maintenance Manual 229
System board components
10.1.4 Installing the CMOS battery
Figure 102: Installing the CMOS battery
Ê At a slight angle, fit the new CMOS battery into its socket as shown in the
figure above.
V CAUTION!
Ensure to insert the CMOS battery with the positive pole (label side)
facing up as shown.
Ê Press on the CMOS battery until it locks in place.
Ê Ensure that the locking spring is properly engaged.