BX924 S4 Upgrade and Maintenance Manual 165
Main memory
8.3.3 Removing a memory module
Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page 148.
V CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Memory sequence" on page 148.
Ê If required, remove the mezzanine carrier for better handling of the DIMMs
of CPU 1.
Figure 56: Removing memory modules
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
Ê Remove the ejected memory module.
To Next Page
Loading...
