BX924 S4 Upgrade and Maintenance Manual 61
Basic hardware procedures
4.9 Concluding software tasks
Ê Perform the following software tasks to put the server blade back into
operation:
– "Resetting the boot retry counter" on page 82
– "Verifying the system time settings" on page 86
– "Viewing and clearing the System Event Log (SEL)" on page 87
– "Updating the NIC configuration file in a Linux environment" on page 89
– "Enabling BitLocker functionality" on page 91
– "Performing a RAID array rebuild" on page 92
– "Looking up changed MAC / WWN addresses" on page 92
To Next Page
Loading...
