Fujitsu PRIMERGY BX924 S4 - Removing the TPM; Re-Installing the TPM; Concluding Steps

256 Upgrade and Maintenance Manual BX924 S4
System board components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20569-001.fm
10.3.3.3 Removing the TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 249.
10.3.3.4 Re-installing the TPM
Figure 116: TPM spacer
The TPM spacer is already present on the system board.
Ê Re-install the TPM as described in section "Installing the TPM" on page 243.
10.3.3.5 Concluding steps
Perform the following procedures to complete the task:
Ê Install the system board as described in section "Installing the system board"
on page 268.
Ê Close the server blade as described in section "Closing the server blade" on
page 56.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page 57.
Ê If applicable, close the rack door as described in section "Closing the rack
door" on page 62.