BX924 S4 Upgrade and Maintenance Manual 93
Basic software procedures
Ê Switch on or restart your server blade.
Ê As soon as the startup screen appears, press the [F2] function key to enter
the BIOS.
Ê Depending on the number of network controllers in your system, you will find
one or several Port Configuration menu items.
Use the arrow key ç to scroll to the right and browse all available tabs.
Each Port Configuration tab will display detailed information on the related
network controller, including its MAC address.
Ê Note down the new 12-digit MAC address.
Ê Press [Esc] to exit the BIOS.
Ê Inform the customer about the changed MAC address.
5.2.16.2 Looking up WWN addresses
Emulex FC / FCoE adapters
Ê Enable the network controller’s Option ROM in the system board BIOS as
described in section "Enabling Option ROM scan" on page 80.
Ê Restart the server.
Ê During boot, as soon as the Emulex BIOS utility option appears, press
[ALT]+[E] or [CTRL]+[E].
Ê Under Emulex Adapters in the System you will find all available Emulex
adapters and their WWN addresses.
Ê Note down the new 16-digit WWN address.
Ê Press [Esc] to exit the Emulex BIOS utility.
Ê Inform the customer about the changed WWN address.
To Next Page
Loading...
