72 Upgrade and Maintenance Manual BX924 S4
Basic software procedures
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20564-001.fm
5.1.10 Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front of the server blade for easy identification.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the ID indicators.
I When the ID button is pushed for five seconds or more and
separated, it lights to blue.
In addition, when the ID button is pushed again within one second,
NMI is issued.
I For further information, refer to section "Front panel indicators" on
page 284.
Using management blade web interface
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
Ê Press the Locate button in the server blade status frame to switch on the ID
indicator.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch on the ID indicator.
To Next Page
Loading...
