200 Upgrade and Maintenance Manual BX924 S4
Processors
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20568-001.fm
Ê Shut down the server blade as described in section "Shutting down the
server blade" on page 52.
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page 54.
Ê Open the server blade as described in section "Opening the server blade"
on page 55.
Ê If necessary, remove the memory as described in section "Removing a
memory module" on page 165.
Ê Remove the desired processor heat sink as described in section "Removing
processor heat sinks" on page 219.
9.4.3 Upgrading or replacing a processor
9.4.3.1 Removing the processor
Figure 78: Opening socket release lever 1
To Next Page
Loading...
