56 Upgrade and Maintenance Manual BX924 S4
Basic hardware procedures
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20563-001.fm
4.6 Closing the server blade
V CAUTION!
● Before attaching the cover, make sure no unnecessary parts or tools
are left inside the server.
● In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY BX924 S4 server blade must not run while the cover is
removed.
● For further safety information, please refer to chapter "Important
information" on page 29.
Figure 10: Closing the server blade
Ê Place the cover on the server blade housing such that it lies flush with both
sides, leaving a gap of approx. 1-2 cm from the front frame.
Ê Push the cover in the direction of the arrow until it snaps into place.
To Next Page
Loading...
