Fujitsu PRIMERGY BX924 S4 - Removing the Server Blade from the System Unit

54 Upgrade and Maintenance Manual BX924 S4
Basic hardware procedures
© cognitas. Gesellschft für Technik-Dokumentation mbH 2013 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-20563-001.fm
4.4.2 Removing the server blade from the system unit
Figure 8: Removing the server blade from the system unit
Ê Push the release lever (1) up slightly to unlock the ejection lever (2).
Ê Swivel the ejection lever down until it is horizontal.
Ê Pull the server blade out of the system unit.
햲
햳