Installing the new FBU
▶
Install the FBU in the FBU holder and connect the FBU cable to the FBU,
see "Installing the FBU in the FBU holder" on page 228
.
▶
Install the FBU with the FBU holder, see "Installing the FBU holder" on
page 230.
Concluding steps
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
The recalibration of the FBU starts automatically, and finishes within a
few minutes.
▶
If applicable, "Installing the front cover with lock" on page 61.
Expansion cards and backup units
234 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
