Fujitsu PRIMERGY RX4770 M6 - Page 252

Removing the defective memory module
▶
Remove the memory module, see "Removing a memory module" on
page 249
.
Installing the new memory module
▶
Install the memory module, see "Installing a memory module" on page 245.
Concluding steps
For memory slots on the bottom system board:
▶
"Removing the air duct 2 (bottom system board)" on page 69.
▶
"Installing the top system board carrier" on page 76.
▶
"Installing the air duct 1 (top system board)" on page 71.
▶
"Installing a riser module" on page 63.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
"Resuming BitLocker functionality" on page 104.
For memory slots for the top system board:
▶
"Removing the air duct 1 (top system board)" on page 68.
▶
"Reassembling" on page 53.
▶
"Connecting the power cord" on page 59.
▶
"Switching on the server" on page 60.
▶
If applicable, "Installing the front cover with lock" on page 61.
▶
"Resuming BitLocker functionality" on page 104.
Main memory
252 Upgrade and Maintenance Manual RX4770 M6