Removing the CPU
Figure 171: Removing the heat sink
▶
Remove the heat sink from the CPU frame.
▶
Clean residual thermal paste from the CPU surface and the heat sink
surface using a lint-free cloth and store the CPU in a save place.
CAUTION
CPUs are extremely sensitive to electrostatic discharge and therefore
must always be handled with care.
▶
After a CPU has been removed from its protective sleeve or from
its socket, place it upside down on a nonconducting, antistatic
surface.
▶
Never push a CPU over a surface.
Liquid cooling (LC)
286 Upgrade and Maintenance Manual RX4770 M6
To Next Page
Loading...
