GE HEALTHCARE
DIRECTION FQ091013, REVISION 1    VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup  3-155
3-10-9-3-8 Saved Worksheets
On the Vivid i n/ Vivid q N scanner, it is possible to view the Worksheet and press Store. This will 
generate a still frame showing a snapshot of the Worksheet with the visible measurements on it. This 
same snapshot will also be visible in the MPEGvue Viewer.
This feature allows users to archive some important measurements into the MPEGvue file.
3-10-9-3-9 Reports (.CHM files)
When Reports have been generated and saved on the Vivid i n/ Vivid q N scanner, they will be exported, 
along with the rest of the MPEGvue exam to the remote PC where they can be reviewed as CHM files.
When an exam contains Reports, an additional button is displayed on the bottom of the MPEGvue 
Screen enabling the user to view the Reports of that exam.
3-10-9-3-10 Using MPEGVue over E-mail
Note: To use the MPEGVue over E-mail feature, Microsoft Outlook must be currently running. If not, 
the following message is displayed prompting the user to first logon to Outlook:
It is possible to send images, loops, or full exams from any eVue PC. An eVue PC is a PC which 
contains the MPEGvue player and an e-mail client application (e.g. Microsoft Outlook).
The currently-selected image, or the entire examination, can be sent by e-mail as an attachment to one 
or several regular e-mail messages. Refer to Sending a Full Examination by E-mail below, or Sending 
an image by E-mail on page 3-157, as applicable. 
The recipient PC of those e-mail messages (where the eVue viewer is installed), will receive the exams 
and will integrate them into its Patient List, for easy review.
Sending a Full Examination by E-mail
Note: If this is the first time your recipient is receiving MPEGVue images, it is necessary to attach 
the MPEGVue Player - refer to the instructions for Sending the MPEGVue Player Software 
by E-mail on page 3-159.
1) From the MPEGVue Screen, open the examination to be sent and click the E-mail button (#10 in 
Figure 3-162 on page 3-153).
The E-mail Dialog box is displayed (see Figure 3-163 on page 3-156).
2) Activate the Send Current Exam radio button (and if necessary, the Attach Player Software 
check box), as shown in Figure 3-163 below.