• Click on to delete the model template or click on “Delete Selected Templates” to delete multiple selected
templates at once.
• Click on “Toggle Selected Template(s)” to toggle the status between enabled/disabled for the selected model
templates.
Model Update
UCM6100 zero config feature supports provisioning all models of Grandstream SIP end devices. Templates for
most of the Grandstream models are built in with the UCM6100 already. Templates for GS Wave and
Grandstream surveillance products require users to download and install under Web GUI→Value-added
Features→Zero Config→Model Update first before they are available in the UCM6100 for selection. After
downloading and installing the model template to the UCM6100, it will show in the dropdown list for “Model”
selection when editing the model template.
• Click on to download the template.
• Click on to upgrade the model template. Users will see this icon available if the device model has
template updated in the UCM6100.
Figure 65: Template Management
In case the UCM6100 is placed in the private network and Internet access is restricted, users will not be able to
get packages by downloading and installing from the remote server. Model template package can be manually
uploaded from local device through Web GUI. Please contact Grandstream customer support if the model
package is needed for manual uploading.
To Next Page
Loading...
Need help?
General
