Grandstream Networks UCM6100 Series User Manual

P a g e | 35
UCM6100 Series User Manual
Version 1.0.18.13
• Added Fax gateway support for Fax mode on FXS and FXO port.
• Added “NAT” option and “Send PPI Header” option in SIP register trunk configuration. [Table 54: SIP Register
Trunk Configuration Parameters]
• Added REC API (access for call recording files). [REC API ]
• Added “Synchronize All Data” option in Data Sync. [Data Sync]
• Added “Detect Selected Sound Files” option for Music On Hold files. [MUSIC ON HOLD]
Firmware Version 1.0.7.11
• Added office time and holiday setting. [Office Time] [Holiday]
• Added new architecture for auto provisioning via Zero Config. [PROVISIONING]
• Added Alert-info configuration for distinctive ringing on inbound route. [Table 62: Inbound Rule Configuration
Parameters]
• Added SLA support to monitor FXO trunk. [SLA]
• Added Follow Me support. [FOLLOW ME]
• Added One-Key Dial support.
• Added FXO Dial Delay option for analog trunk. [Table 51: Analog Trunk Configuration Parameters]
• Added Music On Hold selection per extension. [EXTENSIONS]
• Added Call Forward Time Condition per extension. [EXTENSIONS]
• Added custom prompt support for ring group announcement. [Table 72: Ring Group Parameters]
• Added custom prompt support for paging/intercom group announcement. [Table 73: Paging/Intercom Group
Configuration Parameters]
• Added options to delete voicemail and Fax files via cleaner. [System Clean]
• Added DTMF configuration per trunk. [VOIP TRUNKS]
• Added call queue Music On Hold customization. [Table 75: Call Queue Configuration Parameters]
• Added call queue destination support. [Table 75: Call Queue Configuration Parameters]
• Added batch add blacklist file support. [Blacklist Configurations]
Firmware Version 1.0.6.11
• Added service check options under Web GUI→Maintenance→Troubleshooting→Service Check page to
regularly check Asterisk service.
Firmware Version 1.0.6.10
• Added static routes function. [Static Routes]
• Added option to provision end devices’ date format, time format and time zone in zero config.
• Added option to disable extension/trunk.
• Added TEL URL support for extension/trunk.
• Added option to dial trunk password per extensions.
• Added export extension and import extension function. [Export Extensions] [Import Extensions]
• Added option "Need Registration" for SIP register trunk.

Grandstream Networks UCM6100 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6100 Series
Category	PBX
Language	English