setting under Web GUI→System Settings→Email Settings is properly configured and tested on the UCM6100
before using “E-mail Notification”.
When click on “E-mail Notification” button, the following message will be prompted in the web page. Click on OK
to confirm sending the account information to all users’ Email addresses.
Figure 86: E-mail Notification - Prompt Information
The user will receive Email including account registration information and LDAP configuration. A QR code is also
generated for Mobile applications to scan it and get automatically provisioned. QR code provisioning is supported
on Grandstream Softphone GS Wave Android
TM
application and iOS application.
Figure 87: Account Registration Information and QR Code
To Next Page
Loading...
